SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> stock footpeg mod /cgi-bin/YaBB.pl?num=1236623866 Message started by diamond jim on 03/09/09 at 11:37:46 |
Title: stock footpeg mod Post by diamond jim on 03/09/09 at 11:37:46 I don't like how thick the top of the pegs are. http://i255.photobucket.com/albums/hh128/russ_diamond_jim/55.jpg To maximize my forward controls, I had been thinking of buying and modding some pegs for the purpose of getting the top of the peg even with the top of the mount and therefore the top of my legs horizontal to the ground when riding instead of my knees an inch higher than my thighs like they have been. http://i255.photobucket.com/albums/hh128/russ_diamond_jim/S4021687.jpg I pulled the pegs off, rotated the rubber 180 degrees, trimmed off the excess (if you've had the pegs apart you'll know what I mean), and put them back on. Because of the thickness and position of the stock peg rubber, when doing this I get another inch of room. Some will wonder about vibration but I've never had a problem and still don't after this mod. It feels just like any other bike I've ever ridden. But with a little bit more legroom. |
Title: Re: stock footpeg mod Post by thumperclone on 03/09/09 at 15:03:20 good trick, may have to try it..didnt think 4" would make the difference it does, another inch may be even better( ) |
Title: Re: stock footpeg mod Post by serowbot on 03/09/09 at 17:36:26 Interesting mod.... how did you trim the rubber?... a grinder?... I like it.... |
Title: Re: stock footpeg mod Post by diamond jim on 03/09/09 at 19:00:03 Cut then grinded. It's hollow in the raised part of the rubber so it's easy to cut. Grinding wasn't really needed on the rubber but did it to clean it up a tad. http://i255.photobucket.com/albums/hh128/russ_diamond_jim/pegmod.jpg |
Title: Re: stock footpeg mod Post by Savage Eddie on 03/09/09 at 19:38:12 that's what i like about Jim....always a detailed exploded picture involved! im defiantly interested in forward controls.....very cool! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |