SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Anyone know the reducer size? /cgi-bin/YaBB.pl?num=1236392001 Message started by Mortation on 03/06/09 at 18:13:21

Title: Anyone know the reducer size? Post by Mortation on 03/06/09 at 18:13:21 I wanted to order the new header tonight but when I was looking at the bike after work I noticed it used a reducer to plug into the Harley muffler.  I forgot to measure it and now its dark.  Anyone know what size reducer I need so I can replace the nasty rusty one?

Title: Re: Anyone know the reducer size? Post by justin_o_guy2 on 03/08/09 at 00:20:08 :)

Title: Re: Anyone know the reducer size? Post by diamond jim on 03/08/09 at 00:45:52 72706D6B7E6B7670711F0 wrote: I wanted to order the new header tonight but when I was looking at the bike after work I noticed it used a reducer to plug into the Harley muffler.  I forgot to measure it and now its dark.  Anyone know what size reducer I need so I can replace the nasty rusty one?   The reducer is a DIY project.  Some bolt the HD muffler directly to the header.  Others have a reducer made that positions the muffler back further and with a 10 degree angle.  The goal of the reducer is to keep the black exhaust soot off of the rear brake cover/actuator arm.

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.