SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> lega lite license frame
/cgi-bin/YaBB.pl?num=1235370671

Message started by thumperclone on 02/22/09 at 22:31:11

Title: lega lite license frame
Post by thumperclone on 02/22/09 at 22:31:11

save your money!!!mine didnt last a year.
the ckt boards for the leds are ridgid and their joints are solid conductors..they dont hold up to vibration.. >:(
tried to re solder then another then..then etc..file 13 that carp!!

bought a flexable totally encapsullated strip from superbriteleds.com
< $12 w/shipping hooked up to the brake ckt,2 red led license bolts for the running/marker ckt..

2 nite ordered 3 more 120 deg. strips
1 yellow/amber for the allthread across the front between the forward controll plates
2 red 1 ea. for under both sides of the swing arm

Title: Re: lega lite license frame
Post by justin_o_guy2 on 02/24/09 at 00:22:08

I was following my kid, she was riding the Suz & I saw what vibration the rear fender goes thru. It shakes like crazy at one point in the rpm range, about to the point of not even being able to read the plate a couple of times. Maybe she was gunning it pretty hard, I dunno.

Title: Re: lega lite license frame
Post by thumperclone on 02/24/09 at 07:58:11

found another vibe/rattle spot,where the belt guard tucks behind the pully cover,some weather stip foam cured that but the chrome on the guard is gone