SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Needle jet removal ? /cgi-bin/YaBB.pl?num=1235230622 Message started by yvrsavage on 02/21/09 at 07:37:02 |
Title: Needle jet removal ? Post by yvrsavage on 02/21/09 at 07:37:02 Hi, I am in the process of cleaning up my carb and took everything apart except the ( needle jet ) Any ideas of which way to push or pull it out and with what. With the carb sitting up right . Do I push it down or up ? :) |
Title: Re: Needle jet removal ? Post by matt_savage on 02/21/09 at 07:45:26 http://suzukisavage.com/cgi-bin/YaBB.pl?num=1104205157/15 Look on the second page for pics of how-to -Matt |
Title: Re: Needle jet removal ? Post by yvrsavage on 02/21/09 at 07:59:37 Hi Matt, I am talking about the ( needle jet ) removal not the needle removal. The needle jet is where the main jet sits under . :) |
Title: Re: Needle jet removal ? Post by verslagen1 on 02/21/09 at 08:16:46 7A757160706275626466030 wrote:
http://suzukisavage.com/images/uploaded/SteelWolfCarb02.jpg come on there's a million pictures out there, go steal one. that little hole there in the middle? fiche shows it coming out this way, may be pressed in. |
Title: Re: Needle jet removal ? Post by yvrsavage on 02/21/09 at 08:45:49 Thank you Matt and Verslagen 1 for showing is pressed in. I just tapped it out from the bottom. Yup! all the little holes a plugged. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |