SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Side covers (clutch and stator)
/cgi-bin/YaBB.pl?num=1234022509

Message started by Savage_Amusement on 02/07/09 at 08:01:48

Title: Side covers (clutch and stator)
Post by Savage_Amusement on 02/07/09 at 08:01:48

I searched around about removing the crankcases, I remember I saw something awhile back and now I find nothing. I set it to search for a year back so it may have been longer. Anyhow Is there a whole lot involved in the process? I'm not scared to take things apart and put them back together. That is what I do for a living. I'm looking for tips and heads ups. Thanks!!

Edited because I'm a retard.

Title: Re: Did I miss the crankcase posts?
Post by verslagen1 on 02/07/09 at 08:54:49

think engine removal rather than crank case.
not much to it.
remove all bolts and brackets
lay bike down on a pad on right side
wiggle the engine till free and stand it up
lift and put on bench
call medic

Title: Re: Did I miss the crankcase posts?
Post by Savage_Amusement on 02/07/09 at 09:02:52

I just want to take the two sides off so I can have them powder coated.

Title: Re: Did I miss the crankcase posts?
Post by verslagen1 on 02/07/09 at 09:26:30

Ah, those are called covers, clutch and stator.
No issues, get gaskets for when you want to put them back on.

Some polishing can be done insitu.

Title: Re: Did I miss the crankcase posts?
Post by Savage_Amusement on 02/07/09 at 09:28:23

Prolly why I didn't find anything when searching lol. Sorry. I think I'm going to do that today. Gotta do it sometime right.

Title: Re: Side covers (clutch and stator)
Post by Savage_Amusement on 02/07/09 at 10:24:39

I kind of found what I wanted under a thread called Cam Chain adjuster check.

Yeah not doing that today. Kind of forgot I need something to hold my bike up. Once you loosen the kickstand part it kinda will want to lean over. At least I thought of this before I got anywhere. So I swept the garage floor instead. :-[