SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> K&N filter
/cgi-bin/YaBB.pl?num=1233948110

Message started by Jimworx on 02/06/09 at 11:21:50

Title: K&N filter
Post by Jimworx on 02/06/09 at 11:21:50

Does anyone know the model of a K&N cone filter which mounts directly onto the carb? Something that looks like the EMGO.

Thanks,
Jim

Title: Re: K&N filter
Post by LANCER on 02/08/09 at 15:37:12

RC-1250 2.25 in (57 mm) 3.5 in (89 mm) 2 in (51 mm) 4 in (102 mm) Metal 0.625 in (16 mm) 0 degrees 0 in (0 mm)
RC-1252 2.25 in (57 mm) 3.5 in (89 mm) 2 in (51 mm) 4 in (102 mm) Metal 0.625 in (16 mm) 0 degrees 0 in (0 mm)
RC-1253 2.25 in (57 mm) 3.5 in (89 mm) 2 in (51 mm) 4 in (102 mm) Metal 0.625 in (16 mm) 0 degrees 0 in (0 mm)
R-1260 2.25 in (57 mm) 3.5 in (89 mm) 2 in (51 mm) 4 in (102 mm) Rubber 0.625 in (16 mm) 0 degrees 0 in (0 mm)
RU-3560 2.25 in (57 mm) 5.125 in (130 mm) 4.625 in (117 mm) 6 in (152 mm) Rubber 0.625 in (16 mm) 0 degrees 0 in (0 mm)

http://www.4filters.com/assets/images/parts/kn/r-1260-b.jpg This picture is of the R-1260 with the black cap, while most others have the chrome cap and they also cost more whle the black is the chipper one for fewer $$$

Title: Re: K&N filter
Post by Jimworx on 02/08/09 at 19:49:23

Thanks. That's exactly the info I was looking for.