SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Sissy Bar Question /cgi-bin/YaBB.pl?num=1232143179 Message started by bluesavage218 on 01/16/09 at 13:59:39 |
Title: Sissy Bar Question Post by bluesavage218 on 01/16/09 at 13:59:39 Hello all. I removed my sissy bar and backrest, and I was wondering if there are some type of chrome inserts or something of that nature (besides the mini sisssy bars and backrest) to put into the sissy bar brackets? |
Title: Re: Sissy Bar Question Post by Paladin. on 01/16/09 at 14:33:11 Why not find an S40 rider who wants a sissybar and swap siderails with him/her? |
Title: Re: Sissy Bar Question Post by bluesavage218 on 01/16/09 at 14:58:07 I never thought of that I may have to do that? |
Title: Re: Sissy Bar Question Post by SimonTuffGuy on 01/19/09 at 07:08:59 Nothing around that I've seen. Other bikes have a very small bracket/bar that connects the bars, it'd have no backrest, etc... Or, as mentioned above... Find someone with an S40 that wants a sissybar and swap them. I've seen sets on EBay too. Or... Just remove the bars entirely and fill in the holes. Someone on the board (I think Savage_Greg?) did and it looks sweet! |
Title: Re: Sissy Bar Question Post by serowbot on 01/19/09 at 10:24:21 My buddy Gerry just put took his off and put some square table foot caps over the holes,...looks pretty good... he got them at Ace hardware. |
Title: Re: Sissy Bar Question Post by gerald.hughes on 01/19/09 at 10:45:49 Here are a couple of pictures of the caps. http://i414.photobucket.com/albums/pp223/gerald_hughes/right.jpg http://i414.photobucket.com/albums/pp223/gerald_hughes/bazuka-1.jpg |
Title: Re: Sissy Bar Question Post by gerald.hughes on 01/19/09 at 10:47:23 Oops! Mixed up some images. Here is a shot of the caps from the back. http://i414.photobucket.com/albums/pp223/gerald_hughes/Back.jpg |
Title: Re: Sissy Bar Question Post by 88pagan on 01/19/09 at 10:47:31 I also used caps but smaller so they fit inside real snug. They're from Home Depot. I can post a closeup pic later today if you want to see but the idea is just like the pic Gerry posted. |
Title: Re: Sissy Bar Question Post by bluesavage218 on 01/19/09 at 18:46:49 Yeah post a pic if you don't mind. That way I know what I need to buy. This is what I was looking for. |
Title: Re: Sissy Bar Question Post by justin_o_guy2 on 01/20/09 at 11:59:04 Bump, because I really like that second pic Gerald Hughes posted. Gerald, details? |
Title: Re: Sissy Bar Question Post by gayla28 on 01/22/09 at 10:38:10 hi i have a 06 s40 will your backrest fit it we can make a deal if you need my rails |
Title: Re: Sissy Bar Question Post by 88pagan on 01/22/09 at 11:40:17 Not the best pic, I snapped a couple quick ones with my phone. Here's the smaller caps though (I'm still selling these rails and sissy bar if anyone is interested)- http://i14.photobucket.com/albums/a304/88sandman/rail1.jpghttp://i14.photobucket.com/albums/a304/88sandman/rail.jpg |
Title: Re: Sissy Bar Question Post by bluesavage218 on 01/22/09 at 14:54:42 I would say we could make a deal but when I was taking of the backrest I had a bolt break off in the hole and it's all buggered up so I don't think you would want it. 88pagan thanks for the pic that looks good |
Title: Re: Sissy Bar Question Post by 88pagan on 01/23/09 at 05:38:49 Just verified for anyone to save the trouble. The one I used is from home depot, 3/4" x 3/4" square plastic cap for metal. 4 pk is clearance $1.04 right now. I shaved down the nubs just a little bit till it was a nice snug fit. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |