SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Progressive Shock tool needed? /cgi-bin/YaBB.pl?num=1231787695 Message started by daweise1 on 01/12/09 at 11:14:55 |
Title: Progressive Shock tool needed? Post by daweise1 on 01/12/09 at 11:14:55 Looking to take off the end caps (covers) from a pair of 440 and have them powercoated/replaced.... Far as I can tell, I seems I will need the Progressive Shock tool, but I am wondering if anyone has done it without the tool, or if them have one, can I borrow it for shipping and a small rentor fee to ensure proper return. Hate spending $72 on eBay for a tool I will use once..... |
Title: Re: Progressive Shock tool needed? Post by bill67 on 01/12/09 at 11:27:27 Get a woodworking clamp and compress the spring and you can slide the collar off.you might need 2 one for each side of shock |
Title: Re: Progressive Shock tool needed? Post by Reelthing on 01/13/09 at 22:30:48 393C2A38342E386C5D0 wrote:
get the proper tool - think about it - the 440's are big $$$(let's say $300+) - botch them up fooling around on the cheap and what did you gain? |
Title: Re: Progressive Shock tool needed? Post by justin_o_guy2 on 01/14/09 at 00:08:21 Maybe call around some bike shops, offer to pay rent, lay down a deposit. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |