SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> 10" Mini apes
/cgi-bin/YaBB.pl?num=1230826120

Message started by cornfuzed on 01/01/09 at 08:08:40

Title: 10" Mini apes
Post by cornfuzed on 01/01/09 at 08:08:40

Ok, found some at a good price. How hard is it to get them to work on the s40 ? do you have to mod the cables at all?

Title: Re: 10" Mini apes
Post by Yonuh Adisi on 01/01/09 at 10:21:16

It depends on if you have the drag bars or pullbacks originally. If you originally have the pullbacks, no, just re-route the cables. If you originally have drag bars, then yes, you will need to get longer cables.

Title: Re: 10" Mini apes
Post by verslagen1 on 01/01/09 at 10:34:48

So what did you get and where?

Title: Re: 10" Mini apes
Post by Bobbert on 01/01/09 at 13:59:36

I can pick up a set for $20 from the harley dealer down the road.

What's your good deal?

Title: Re: 10" Mini apes
Post by cornfuzed on 01/02/09 at 06:36:58

fleabay had 2 of em for .99 with 4days left... its why is was asking about them... Wasnt sure as they are 3.5" where we are 4" on the tee.
Search ebay for 10" Mini Apes theres 2...

Title: Re: 10" Mini apes
Post by Bobbert on 01/02/09 at 18:36:09

you mean the triple tree clamps?

If you dont mind some of the ribbing on the handlebars hanging out, it's fine. I found the brake cable to be a little tight but it should work.

And for $.99, what do you have to lose?

Title: Re: 10" Mini apes
Post by justin_o_guy2 on 01/03/09 at 22:07:59

Shipping & handling ??? Forty BUKKS??? Shazzam..I dont know what it is, but watch out.

Title: Re: 10" Mini apes
Post by vandaman on 01/04/09 at 11:52:19

actually what bars you have doesnt matter the cables are pretty much the same length on both it matters what risers you have if you have the risers that are on the pull back pars then your good to go if you have the drag bar risers then you will need to to get shorter ones.

Title: Re: 10" Mini apes
Post by rigidchop on 01/04/09 at 12:31:54

actually there is a big difference, in cable length. i have (had) pull backs and ordered a cable for the drags and it was alot shorter. i had to reroute it just to get it to work.