SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Sportster muff volumn /cgi-bin/YaBB.pl?num=1226437641 Message started by Jack_650 on 11/11/08 at 13:07:19 |
Title: Sportster muff volumn Post by Jack_650 on 11/11/08 at 13:07:19 I've got the standard stock Sportster take-off muffler on my 650 and I would like it to be not quite so loud. It seems I'm complaining a lot more about my neighborhood's really loud Harleys at all hours of the day and night and am starting to feel a bit hypocritical. Mine's not near as loud and I don't go roaring around at 2:00 in the morning, but I would still like to take the level down a notch or two. Anyone here know if there's a way to add baffles to those thing? I have a second one still in the box, but don't remember if this one was softer when I first put it on or not. When Midas put it on for me they had to weld a bolt to the side of the muff for the Savage mount. So to do a switch to compare I need to do something similar and I'm not a welder. Jack |
Title: Re: Sportster muff volumn Post by serowbot on 11/11/08 at 14:54:30 If you want to keep the sporty maybe you could find a little chrome turnout that would fit in the end hole...Try autozone or pep boys. |
Title: Re: Sportster muff volumn Post by seviersavage on 11/11/08 at 16:46:52 Jack_650' Is the stock take off sporty much diff than a Dyna drop off? My Dyna is pretty deep sounding, not loud at all. I kinda miss the loud. Seviersavage |
Title: Re: Sportster muff volumn Post by Jack_650 on 11/12/08 at 07:38:27 I really don't know much about the Harley mufflers other than the ones I got so I can't even begin to compare the different models. these are just long and thin without any bulge or taper, but not a straight pipe by any means. Our local Hawg shop had their annual fall "get rid of stuff" open house a couple years ago and I picked up the two Sportster cans for $20.00 like new. This one's been on for about two years/10k or so miles so maybe it's just time to change to the other. I really don't remember what it sounded like when first installed. Jack |
Title: Re: Sportster muff volumn Post by Jerry Eichenberger on 11/12/08 at 11:54:53 My bike has a Sportster muff on it, installed by the PO. It's coming off this winter - I have the OEM unit that's going back on. The Sprtster muff is just too loud. |
Title: Re: Sportster muff volumn Post by seviersavage on 11/12/08 at 12:30:02 Jerry, What you want for your sporty muff? |
Title: Re: Sportster muff volumn Post by thumperclone on 11/12/08 at 18:06:45 if a stock sporty muff is too loud for you you need to go back to an oem muff...or fill a soda can full of steel wool and fab it on to the end of the sporty with bailing wire...... :-[ |
Title: Re: Sportster muff volumn Post by serowbot on 11/12/08 at 18:29:18 No bulge or taper doesn't like a stock harley muffler...Dyna and Sportster stock mufflers look the same and probably are , other than the mount holes. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |