|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> aftermarket turn signals? /cgi-bin/YaBB.pl?num=1224554496 Message started by groupus on 10/20/08 at 19:01:35 |
|
Title: aftermarket turn signals? Post by groupus on 10/20/08 at 19:01:35 I'm just curious as to how easy it is to put after market universal turn signals on the back. I remember someone here doing it by cutting up the stock ones, but i'd like to know if anyone has had success without going to the chopping block. |
|
Title: Re: aftermarket turn signals? Post by Paladin. on 10/20/08 at 19:21:55 Lots have. "Easy" depends on how comfortable you are with wires. |
|
Title: Re: aftermarket turn signals? Post by groupus on 10/22/08 at 07:06:43 wiring is not a problem; I'm more concerned about mounting the hardware without cutting or drilling. the savage has turn signals that are held in by a screw, i have not seen that before. i'm looking to replace my rears (and maybe fronts if i'm feeling adventurous) with smaller bullets with the universal threaded stems. has anyone had success with this or is there is some place selling ones that will fit the savage for cheap? |
|
Title: Re: aftermarket turn signals? Post by Odar on 10/22/08 at 07:48:47 Send me you mailaddress and I send some pics howe I did. Odar http://wb524292.bahnhofbredband.se/nytt6.jpg |
|
Title: Re: aftermarket turn signals? Post by wrenchbender on 10/28/08 at 12:06:43 43686D7E0C0 wrote:
Those look good, what make of signals are they? |
|
Title: Re: aftermarket turn signals? Post by Odar on 11/02/08 at 06:01:58 I have no ide what brand they are, found them 7-8 years back here in Sweden, I have the same ones on my Intruder 1500 as well, but they are cromed instead of aluminium. Odar http://img.photobucket.com/albums/v124/Odar1/Odars%20LC1500%20Intruder/1IMG_5755.jpg?t=1225635241 |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |