SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> carb service /cgi-bin/YaBB.pl?num=1224455299 Message started by Zappa on 10/19/08 at 15:28:18 |
Title: carb service Post by Zappa on 10/19/08 at 15:28:18 I want to makes sure my carb is in good shape. besides draining the float bowl what can i do to it without completely taking it apart. what does the Clymers say about it |
Title: Re: carb service Post by bill67 on 10/19/08 at 16:15:17 You can put SeaFoam in the gas,you can also put some in the fuel bowl if you have it off,It takes a day or so for the SeaFoam to clean the carb |
Title: Re: carb service Post by Charon on 10/19/08 at 16:23:30 Or, you can forget the SeaFoam, and avoid wasting your money and time. All gasoline has, by Federal decree, a cleaning additive designed to keep fuel injectors clean. You already paid for it, when you bought your gas. No point adding something that doesn't work. |
Title: Re: carb service Post by EssForty on 10/19/08 at 16:32:36 The best ways to improve your carb are to remove the idle mix screw brass plug to adjust your idle mixture for your local conditions to reduce backfiring, and also do the white spacer mod to improve intermediate throttle response. Have you done either of those? |
Title: Re: carb service Post by bill67 on 10/19/08 at 17:11:10 My S40 doesn't have fuel injectors,That why I use SeaFoam.Or you could just run some gasoline through it. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |