SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> handlebar riser choices /cgi-bin/YaBB.pl?num=1223946210 Message started by seviersavage on 10/13/08 at 18:03:27 |
Title: handlebar riser choices Post by seviersavage on 10/13/08 at 18:03:27 I need to either find a way to get taller risers or an offset riser. I need better clearance to my tank at full lock. This is in preparation for larger tank. I'm hoping for an inexpensive solution. And I dont want to use more spacer than I need cause master cylinder hose isn't overly long. 2 inches would be enough. What can I do? Seviersavage |
Title: Re: handlebar riser choices Post by serowbot on 10/13/08 at 19:34:29 I made risers out out BMX bike footpegs.. $10.00 at Wallymart. 19mm sockets can work too. http://w3.bikepics.com/pics/2008%5C06%5C03%5Cbikepics-1310115-full.jpg |
Title: Re: handlebar riser choices Post by sluggo on 10/14/08 at 01:02:17 those pegs work for alot of things, i have a matched set that are the handgrips, front and rear pegs. i know rear pegs on a bobber, hey they give me an alternate seating option. my bars just barely clear the tank and i have no problem with that. i posted the craftsman deepwall sockets as risers several years ago, then saw it on american chopper three months after that. i was totally surrised, i didn't think vinne read this fourm. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |