SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> IF the CDI is..... /cgi-bin/YaBB.pl?num=1222611630 Message started by papi_ocho on 09/28/08 at 07:20:27 |
Title: IF the CDI is..... Post by papi_ocho on 09/28/08 at 07:20:27 if the CDI(i think thats what its called)(box about 3in by 2.5in with cooling fins) is sitting under the seat unbolted now: 1: the powder coating rubs down to bare metal on the box 2: the paint on the fender where the box is sitting rubs down to bare metal WILL this situation cause fuses to Short out? when i moved the box a LONG time ago i dont remember if it had busings underneath it or just hard mounted to the fender something is causeing problems like this guy: >:( http://suzukisavage.com/cgi-bin/YaBB.pl?num=1222116571 any info Ideas would b great :'( |
Title: Re: IF the CDI is..... Post by verslagen1 on 09/28/08 at 07:58:08 That's the rectifier. The CDI is under the left side cover, no fins. bare metal to bare metal shouldn't be a problem, mine is bolted to the fender with no isolation bushings. |
Title: Re: IF the CDI is..... Post by papi_ocho on 09/28/08 at 08:18:55 SSHHT ! Today's the test ride. Lets see how it goes I checked every possible place for some kind of worn out wire except for the head light any ideas on finding whats causing the fuses to go? |
Title: Re: IF the CDI is..... Post by verslagen1 on 09/28/08 at 08:38:40 The headlight is a great place for shorts... |
Title: Re: IF the CDI is..... Post by papi_ocho on 09/29/08 at 07:25:13 thanks for the help VERS! the bike went all day yesterday.. i had slide a piece of plastic(cut up dust pan) underneath the Rectifier and removed the brake light mod i had on there. next week i'll put the light mod back on and cross my fingers.... thanks again! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |