SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> rubber seal for speedo
/cgi-bin/YaBB.pl?num=1221427512

Message started by rigidchop on 09/14/08 at 14:25:12

Title: rubber seal for speedo
Post by rigidchop on 09/14/08 at 14:25:12

anyone know the part #? i looked on ron ayers and couldn't find it.

Title: Re: rubber seal for speedo
Post by EssForty on 09/14/08 at 15:04:27

Pretty sure you need to buy the whole speedo cable. Here's a pic of the item you've lost.

http://1.bp.blogspot.com/_2NU0p82vl5Y/SLqw1eXvlII/AAAAAAAAAAc/0nJxQ75mXWU/s320/Speedo+Seal.jpg

You're better off buying a O-ring to fit as others have done.

Title: Re: rubber seal for speedo
Post by rigidchop on 09/14/08 at 15:29:10

o.k. anyone have a part # for an o ring at advance auto or napa (they are the closest to me)

Title: Re: rubber seal for speedo
Post by Ed L. on 09/14/08 at 16:10:26

I ended up using a washer from a kitchen faucet as the seal on the speedo cable. Drilled the center hole out a little to make the cable fit and just squashed it in there. Been almost 3 years with no leaks or drips.

Title: Re: rubber seal for speedo
Post by rigidchop on 09/14/08 at 16:29:07

i might have one of those laying around. thanks.

Title: Re: rubber seal for speedo
Post by Jay on 09/14/08 at 18:05:34

+1 on the kitchen fauset washer. Cheap at Lowes, Home Depot, etc.