SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> What flavor footpegs? /cgi-bin/YaBB.pl?num=1220464341 Message started by Rock_Steady on 09/03/08 at 10:52:20

Title: What flavor footpegs? Post by Rock_Steady on 09/03/08 at 10:52:20 Can anyone recommend some good footpegs that are semi-inexpensive and look good?  Oh, and if they fit that would work great.  Between my wife and I learning on this bike, we have done some damage - me more than her - and I'm worried that bending the left one back into shape will do more harm than good. --Rock

Title: Re: What flavor footpegs? Post by Ed L. on 09/03/08 at 13:14:37 I've been getting the round "O" ring foot pegs made for a Harley from JC Whitney and drilling out the mounting holes to fit the bolt on my Savage. I think they are made by MotoAsia but who cares, they work. Some riders think that there is too much vibration coming thru the solid pegs but it hasn't bothered me. I haven't found any padded or cushioned pegs for cheap yet, when I do I might change over.

Title: Re: What flavor footpegs? Post by MickeyX on 09/03/08 at 20:26:54 I just bought some from dollar rider. They are the Kuryakyn large ISO pegs. I had to get the adaptor to put on them too. The adaptor end is a male end that has an adjustable pin to make them sit straight instead of sagging which most other pegs will do because they don't have the little tab on the end. All together, it was $50 (with shipping) for the set. They ship the next day so it is only taking 3 days to get them in. They are running a sale right now too. Good luck finding some you like. The adaptor will fit any Kuryakyn pegs so you can't lose.

Title: Re: What flavor footpegs? Post by blacksheep23 on 09/07/08 at 14:51:46 183C363E302C0D550 wrote: I just bought some from dollar rider. They are the Kuryakyn large ISO pegs. I had to get the adaptor to put on them too. The adaptor end is a male end that has an adjustable pin to make them sit straight instead of sagging which most other pegs will do because they don't have the little tab on the end. All together, it was $50 (with shipping) for the set. They ship the next day so it is only taking 3 days to get them in. They are running a sale right now too. Good luck finding some you like. The adaptor will fit any Kuryakyn pegs so you can't lose. what's the part # of the adapter?

Title: Re: What flavor footpegs? Post by EssForty on 09/07/08 at 18:15:32 I believe this is the one you are looking for. P/N KY8008-A. http://www.dollarrider.com/detail.cfm?model_ID=0&Category_ID=54&manufacturer_ID=16&product_ID=8315&related=short It has the adjustable set screw mentioned in the prior post.

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.