SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Side Cover Bolts, Seal the Threads? /cgi-bin/YaBB.pl?num=1220227523 Message started by Ed L. on 08/31/08 at 17:05:23 |
Title: Side Cover Bolts, Seal the Threads? Post by Ed L. on 08/31/08 at 17:05:23 A couple of weeks ago I had to pull the left side cover. I used a new gasket and a light layer of ultrablue silicon for the reassemble, tightened the bolts up and now have a slight oil leak along the bottom side of the cover. I have checked the torque on all the side cove bolts and am now wondering if I should of sealed the threads on the bolts with a dab of silicon before putting it all back together. I did find one bolt that I was able to get a bit more on but don't think it was cause of the leak. The edge of the gasket is visable all the way around the side cover so I don't think it moved and is leaking. I can live with the leak but it gets on my nerve to have a leak after all the work of fixing the side cover and installing the new gasket. Whadda think, do the side cover bolts need to be sealed or don't they. |
Title: Re: Side Cover Bolts, Seal the Threads? Post by YonuhAdisi on 08/31/08 at 17:08:26 I have the exact problem with my right cover and the same circumstances. gasket, RTV sealer, and it leaks towards the bottom. Also I think the seal around the clutch lever in the right side cover is leaking. I would somebody replace that particular seal? |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |