SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> valve on the carb. /cgi-bin/YaBB.pl?num=1218723801 Message started by Foxman on 08/14/08 at 07:23:20 |
Title: valve on the carb. Post by Foxman on 08/14/08 at 07:23:20 Ok, im having trouble removing this piece on my carburetor. Ive actually boogered it up. The needle still goes in and out freely. How do i remove the valve? screw out? pull out? ive already removed the screw and the plate. Well i have actually put the carb back together after cleaning it, the bike started up, but i cant get it to idle, i have to keep giving it gas, i was unable to remove the valve, or pilot jet (didnt have right tools at time) The pilot jet could be preventing it from idleing right? i have also gotten to the idle mixture screw, and iam goin to adjust it after the carburetor is back on. the bike sat 2-3 years before i got it. Thanks for any help. http://i187.photobucket.com/albums/x12/CurtisFox2004/valve.jpg |
Title: Re: valve on the carb. Post by Kropatchek on 08/14/08 at 09:06:26 When you have removed the screw and plate the needle valve bushing come out with needle nose pliers. On E-bay there is a guy in Australia selling the complete needlevalve unit for about 15 A$. ;D |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |