SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Going Solo, cover that fender!!!! /cgi-bin/YaBB.pl?num=1217951502 Message started by daweise1 on 08/05/08 at 08:51:42 |
Title: Going Solo, cover that fender!!!! Post by daweise1 on 08/05/08 at 08:51:42 How this would work with a springer seat I don't know, but I'm sure you will all figure out a way.... So you went to a solo seat and need to cover those wires and holes in the factory fender.... Try this....[http://www.mustangseats.com/sportster04/sportster04.shtml] Look at the bottom of the page at the Fender Bibs.... This would look great matching a seat, it's leather so it could flex on the cables, and it's only $30 ;D Thought I would share since I have seen questions about covering a factory fender before |
Title: Re: Going Solo, cover that fender!!!! Post by doc5446 on 08/05/08 at 10:11:06 Looks like it might work! Might hafta try this route. |
Title: Re: Going Solo, cover that fender!!!! Post by rpgpgmr on 08/05/08 at 10:38:59 Your link appears to be dead ... maybe it's my security settings, but it doesn't look like it. |
Title: Re: Going Solo, cover that fender!!!! Post by Dj12midnit on 08/05/08 at 12:16:59 Try this link http://www.mustangseats.com/sportster04/sportster04.shtml |
Title: Re: Going Solo, cover that fender!!!! Post by rpgpgmr on 08/05/08 at 19:50:36 Yep, that fixed it. Very nice! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |