SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Valve adjustment questions
/cgi-bin/YaBB.pl?num=1216251717

Message started by joeh100 on 07/16/08 at 16:41:57

Title: Valve adjustment questions
Post by joeh100 on 07/16/08 at 16:41:57

Do I need to order any gaskets or anything?  What seals the timing plug cover, an O'ring?  Can I just reuse it?

Do I just seal the valve covers with some silicone?


Title: Re: Valve adjustment questions
Post by Dj12midnit on 07/16/08 at 16:53:44

There is a realy good write up in the Technical Documents/Reference section.

Title: Re: Valve adjustment questions
Post by YonuhAdisi on 07/16/08 at 16:59:43


54515B560F0E0E3E0 wrote:
Do I need to order any gaskets or anything?  What seals the timing plug cover, an O'ring?  Can I just reuse it?

Do I just seal the valve covers with some silicone?


The valve covers are also sealed using an o-ring.

Title: Re: Valve adjustment questions
Post by joeh100 on 07/16/08 at 17:27:40


Quote:
The valve covers are also sealed using an o-ring.


Well, that's good news.  Thanks a lot.

Title: Re: Valve adjustment questions
Post by YonuhAdisi on 07/16/08 at 17:33:06

No problem.  :)

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.