SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Throttle diameter size?
/cgi-bin/YaBB.pl?num=1215371309

Message started by skatnbnc on 07/06/08 at 12:08:28

Title: Throttle diameter size?
Post by skatnbnc on 07/06/08 at 12:08:28

I did several searches because I know we've covered this in the past, but it looks like the subject has been deleted.

Is our throttle 1" or 7/8"?
or What diameter throttle lock do I get for an 2006 LS650?

Thanks guys!  :)

Oh yeah -the hurry was because I was bidding on one on ebay so I want to make sure its the right size!

Title: Re: ASAP please! Throttle diameter size?
Post by skatnbnc on 07/06/08 at 13:02:01

Dang Clymers manual has nada, but some old notes of mine show 1" throttle size.

Can anyone confirm that?

Title: Re: ASAP please! Throttle diameter size?
Post by rigidchop on 07/06/08 at 13:09:16

yes it is 1"

Title: Re: Throttle diameter size?
Post by skatnbnc on 07/06/08 at 13:10:38

Well THANK YOU because I just bought the 1" size!

Appreciate it!  :)

Title: Re: Throttle diameter size?
Post by rigidchop on 07/06/08 at 13:14:25

no problem, just glad i could help.

Title: Re: Throttle diameter size?
Post by bill67 on 07/06/08 at 14:57:16

   Whats a throttle lock?

Title: Re: Throttle diameter size?
Post by skatnbnc on 07/06/08 at 15:23:27


3C37323268695E0 wrote:
   Whats a throttle lock?


A circular clamp that goes around the throttle and holds it in place like a cruise control.  A thumb lever switches it on and off.
There are several different models, but they all work on the same principal of clamping the throttle open.

A great addition for long distance rides.

Title: Re: Throttle diameter size?
Post by bill67 on 07/06/08 at 15:47:15

  Ok I know what that is I thought you were talking about something that went on the carb.

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.