SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> 16" turnout installed
/cgi-bin/YaBB.pl?num=1213470415

Message started by barry68v10 on 06/14/08 at 12:06:54

Title: 16" turnout installed
Post by barry68v10 on 06/14/08 at 12:06:54

Just installed a 16" turnout muffler. Sounds great! Midrange power increased significantly by my seat-o-the-pants-o-meter. ;D

Turned DARK BLUE first trip out...now I don't really care about that because I'm painting everything flat black soon anyway, but just so you all know, this muffler from JCWHITNEY flows quite a bit with very little back-pressure, so if you get one, REJET ASAP.

Title: Re: 16" turnout installed
Post by Texas-1-lunger on 06/14/08 at 14:01:00

Do you have a link to this item or a part#?

Title: Re: 16" turnout installed
Post by barry68v10 on 06/14/08 at 14:13:09

Turned Out Muffler, 16"L ZX025199T Each $48.99

Turned Out Muffler, 19"L ZX025200R Each $47.99

Either of these would work, you'll need a 10-degree bend in a pipe to connect to the header to make it work. I used the stock muffler mounting location and welded the whole thing together to avoid leaks.

My muffler exits even with the rear axle in an attempt to maximize the mid-range, which seemed to work...

Title: Re: 16" turnout installed
Post by strangeling on 06/14/08 at 15:30:40

Any Pics ?