SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Carburetor adjustment!! Need Help!!
/cgi-bin/YaBB.pl?num=1212956747

Message started by sammy on 06/08/08 at 13:25:47

Title: Carburetor adjustment!! Need Help!!
Post by sammy on 06/08/08 at 13:25:47

Hey I'm wanting to remove the plug hiding my adjustment screw, Make sure I've got this right now! If I'm sitting on the bike the plug is on my right side, if I'm looking at the right thing now it is right above where the carb connects to the jug and is a brass plug maybe 1/4 or 5/16 diameter, mine has a really small hole in the center of it already. Someone tell me this is the right thing now, I started drilling into this thing and it seems to be thicker than I thought it should be so I stopped and came to the computer to ask the people who know,please help!! I'm waiting for an answer before I go any further! Thanks, Sammy.

Title: Re: Carburetor adjustment!! Need Help!!
Post by sammy on 06/08/08 at 13:56:03

Allright, I found the answer, thanks to Savage Greg's pictures in the technical section thanks alot Greg that is very helpful, good pictures. I looked for the answer before I posted this question in the first place, just didn"t look hard enough! Thanks everyone, Sammy.

Title: Re: Carburetor adjustment!! Need Help!!
Post by barry68v10 on 06/09/08 at 03:17:42

By now it's a pretty safe bet that it's been discussed and somebody's posted pictures if it has to do with a Suzuki Savage... ;D

Title: Re: Carburetor adjustment!! Need Help!!
Post by justin_o_guy2 on 06/10/08 at 09:22:40

Tape wrapped around the drill bit can help keep it from snagging & running thru & damaging the soft screwhead back there. Its a vwery thin cap you are drilling.