SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> need a little more help...please
/cgi-bin/YaBB.pl?num=1211927009

Message started by dj-omaha on 05/27/08 at 15:23:28

Title: need a little more help...please
Post by dj-omaha on 05/27/08 at 15:23:28

Hello, I recently posted and got a lot of good help, thanks by the way, but sadly I need some more. At idle the bike seems fine, but as I start to rev it up, a little past 3thousand or so it starts missing and starts to die if I don't let off. Obviously I think this is bad, and since this is my first bike I'm a little nervous to just ride and see how it does. First off, stupid question time, I have the clymer and for adjusting the float level book says 1.06 to 1.114inches, is that correct? Also the

Title: Re: need a little more help...please
Post by demin on 05/27/08 at 15:27:25

Depends on the jet/pipe situation.But I'm thinking that the carb may need to be cleaned.It sounds if the slide might be sticking.

Title: Re: need a little more help...please
Post by Reelthing on 05/27/08 at 20:46:55

leave the float as is- from your other post it sounds like the bike is sucking fuel through the vacuum line at the petcock - fix that first.