SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Chrome Engine Head Covers /cgi-bin/YaBB.pl?num=1211747749 Message started by SavageGreaseMonkey13 on 05/25/08 at 13:35:49 |
Title: Chrome Engine Head Covers Post by SavageGreaseMonkey13 on 05/25/08 at 13:35:49 I decided to take off my chrome engine head covers today and i had a question about the front left bolt in the head. Is there any way to get that bolt out easily? Do i just have to cut it out or do most of you wait till you pull the head plate off? Thanks for the help. Mario |
Title: Re: Chrome Engine Head Covers Post by verslagen1 on 05/25/08 at 14:05:14 Tie it place with a wire or cut the head of the bolt off with a abrasive cut off wheel. comes off with the head cover. |
Title: Re: Chrome Engine Head Covers Post by SavageGreaseMonkey13 on 05/25/08 at 14:15:42 yeah thats what i thought. i guess ill have to try to cut it out. thanks. |
Title: Re: Chrome Engine Head Covers Post by Rogue_Cheddar on 05/25/08 at 17:45:11 I just put a couple of chrome spacers in there and left the bolt in place. Makes people ask "What's that for?" I just tell them "It's the hoo da doo tata for the fogerty bevel for when I replaced the anna canna poona." |
Title: Re: Chrome Engine Head Covers Post by justin_o_guy2 on 05/25/08 at 23:12:38 You can say that with a straight face? |
Title: Re: Chrome Engine Head Covers Post by Rogue_Cheddar on 05/27/08 at 18:30:08 Oops, forgot to add this. :D |
Title: Re: Chrome Engine Head Covers Post by toddlamp8 on 05/27/08 at 19:11:45 I just replaced it with a shorter bolt. For a while I didn't have a bolt in there at all and I was leaking oil out the side. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |