SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> making repairs need help /cgi-bin/YaBB.pl?num=1209841018 Message started by Dj12midnit on 05/03/08 at 11:56:57 |
Title: making repairs need help Post by Dj12midnit on 05/03/08 at 11:56:57 I am trying to remove the clutch handle. I have everything undone but can not figure out how to get the hand grip off. The Clymers just says to take it off it does not say how. guess I should mention it is a 2006 in case it makes a difference. |
Title: Re: making repairs need help Post by verslagen1 on 05/03/08 at 13:04:54 When I did mine I stuck in a screwdriver and twisted until I worked it completely around then stuck in 2 more equally spaced then twisted the whole thing off. |
Title: Re: making repairs need help Post by Dj12midnit on 05/03/08 at 14:34:12 I could not find anywhere to slide in a screw driver. |
Title: Re: making repairs need help Post by demin on 05/03/08 at 14:44:53 If it's like the older ones remove the chrome end cap.It's just pushed into the end of the bars.Then you can get a screwdriver under the grip. |
Title: Re: making repairs need help Post by Dj12midnit on 05/03/08 at 14:47:18 It has the chrome on the ends. I tried twisting pulling it all looks like one solid piece. |
Title: Re: making repairs need help Post by demin on 05/03/08 at 15:08:37 Maybe this will help,easier than trying to explain. :) http://fiche.ronayers.com/Index.cfm/Module/Main/TypeID/26/Type/Motorcycle/MakeID/2/Make/Suzuki/YearID/47/Year/2006/ModelID/7860/Model/LS650/GroupID/373603/Group/HANDLE_LEVER_ |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |