SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> turn signal relay
/cgi-bin/YaBB.pl?num=1209446202

Message started by DavidD on 04/28/08 at 22:16:42

Title: turn signal relay
Post by DavidD on 04/28/08 at 22:16:42

OK, so I finally get up the nerve to drive the '87 all the 23 miles to work.  Thinking "Eh, I've got most everything IMPORTANT working".  Yeah, I did.   But on the way home, I noticed the blinkers weren't blinking. So after procrastinating for 2 weeks, I've finally torn into the wiring.  It's really bad.  The wire that goes down to the rear-brake switch? - it's a piece of white extension cord.  Fusebox? What fusebox? I don't see no stinking fusebox.  And the turn-signal wires?  They change color 3 times between the left handlebar pod and the rear turn signals.  The Clymer schematic doesn't say anything about purple and yellow wires. ;)

Anyway, I think the turn signal relay musta vibrated loose and fallen out of the bike on the way to or from work. On bikebandit's parts fiche, I see there's supposed to be a bracket to hold the relay to the frame - I guess the PO scrapped it as "excess weight".  I was tracing wires tonight, and I THINK I found where it's supposed to plug-in.  Or at least I found where the light blue wire ends in a female "L" plug with 2 other wires, and I'm guessing there's supposed to be a relay there.  

Can anybody confirm that the relay plugs into an "L" shaped plug?  I'm kinda sure that's where the blue wire ends, but I might have missed a color-change-splice somewhere.

Thanks,
Dave

Title: Re: turn signal relay
Post by demin on 04/29/08 at 03:43:09

You can run a regular turn signal flasher.Available anywhere. ;)
Look in front/below tank in front of lower flame.
http://w2.bikepics.com/pics/2007/09/09/bikepics-1018371-800.jpg

Title: Re: turn signal relay
Post by DavidD on 04/29/08 at 06:51:55

Ah, thanks Demin.  I was wondering if a generic flasher would work.

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.