SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Snap connectors
/cgi-bin/YaBB.pl?num=1208463561

Message started by Hell, Billy on 04/17/08 at 13:19:21

Title: Snap connectors
Post by Hell, Billy on 04/17/08 at 13:19:21

Hi,

I`m bobbing Suzi & changing my lights and I know I could just cut off the male ends and splice, but some of these stock lights are perfectly good & somebody might want `em cheap. Specifically looking for the male ends for my tail light [3 wires], plate light [2 wires] and both rear blinkers [2 wires]. I`ll need those crimp ends to fit or I could use some used ones. Any ideas?

Thanks,

B

Title: Re: Snap connectors
Post by verslagen1 on 04/17/08 at 13:58:00

You can get the bullet connectors at most auto stores (I think I got mine at pep boys)

You bet some one will want them! New style or old?

;D

Title: Re: Snap connectors
Post by Hell, Billy on 04/17/08 at 16:11:39

Off my 3700 mile `07. A spare tail light, the plate light and the R-side blinker, nice shape.

After my recent spill, I decided to mount some metal [aluminum] directionals as they took a hit-I was able to glue up the front blinker OK. I was thinking of moving the RR blinker up to the LF -it`ll fit-but I think the front ones are dual filament as they are also running lights-not so the rear-at least on my Suzi.

Bobbin` away, but Inspection day approaches-gotta pass! I have a bunch of parts I`ll post when I`m thru. Suzi is on a diet.

thanks,

Bill

Title: Re: Snap connectors
Post by T Mack 1 on 04/18/08 at 10:55:05

I got some at the local Auto-Zone that were real close to the OEM ones.