SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Timing plug removal /cgi-bin/YaBB.pl?num=1208270746 Message started by ridgerunner on 04/15/08 at 07:45:45

Title: Timing plug removal Post by ridgerunner on 04/15/08 at 07:45:45  I see a lot questions here about how to get the timing plug out. I thought I would share my Idea with you. It ain't rocket science, but it works everytime. Just take a 10 inch file (used is better and a lot cheaper) and grind about a one inch section on the end that will fit in the slot and then above that grind another section about a quarter of an inch deep and one inch long(to give you room to get in the slot and turn it).  I tried to upload a pic but for some reason it will not load.

Title: Re: Timing plug removal Post by vtail on 04/19/08 at 14:03:12 I use a large 2.5" inch daimeter washer, clamp it in a visegrip. easey off, easy on. ;)

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.