SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Help!!!
/cgi-bin/YaBB.pl?num=1205439727

Message started by oksavage on 03/13/08 at 13:22:06

Title: Help!!!
Post by oksavage on 03/13/08 at 13:22:06

I had to change the cam chain on my 86 savage. Ok so I got the picture of the bolt placement and taped it to a box, no prob. The other day my daughter was kicking her soccer ball in the garage, it hits the box bolts are everywhere. I located them all, not sure about washers. now what?? Is there any listing by size and where they go? I do have a Clymers manual. thanks

Title: Re: Help!!!
Post by demin on 03/13/08 at 13:35:18

In my manual,it's on page 87.Shows the lengths,where they go,and which ones have the seal washers/gaskets on them.

Title: Re: Help!!!
Post by verslagen1 on 03/13/08 at 14:03:43

LOL, been there, had that done to me, ;D

have pict with the lengths, can't post. :'(

send me your email and I'll send it to you.

Title: Re: Help!!!
Post by oksavage on 03/13/08 at 16:13:56

does L25 mean 25 millimeters long?

Title: Re: Help!!!
Post by demin on 03/13/08 at 16:15:08

Yep.