SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Pegs
/cgi-bin/YaBB.pl?num=1204870451

Message started by Savage13 on 03/06/08 at 22:14:11

Title: Pegs
Post by Savage13 on 03/06/08 at 22:14:11

Just wondering if there are any peg adapters for Kuryaken and other types of custom pegs for our Savages? If not i'll have to keep drillin through alot of expencive chrome until i make up my mind about what pegs i want lol.

Title: Re: Pegs
Post by vtail on 03/07/08 at 10:19:39

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1204349808/11#11 ;)
Most work best with the crashbars. A lot of times you can shorten your search by using the search engine in this forum like typing in highway pegs :)

Title: Re: Pegs
Post by Savage13 on 03/07/08 at 11:32:28

Not lookin for big ugly bolt-onto-the-frame-pegs, i'm replacing the big nasty rubber factory pegs. I drill the opening of Kuryaken HD Sportster model pegs with a 7/16ths metal cuttin bit and they fit decently, they just have alot of movement to them, i'm looking for a snugger fit. Lookin into the new ones they have with the adjustment screw on the end, but that still leaves a bit of space on the sides i may shim up with washers; passenger pegs are a whole other story, nearly impossible to have them able to fold like stock and stay in the up position without falling down all the time.

Title: Re: Pegs
Post by Savage13 on 03/07/08 at 11:37:23

I apologize to anyone using bolt ons for my ugly comment, it's just my taste. I have the "less is more" syndrome ;) , i'll alter or remove parts for a more streamlined smooth look; but will likely NEVER install anything bulky or out of sync with the smooth lines i'm after.

Title: Re: Pegs
Post by Savage13 on 03/07/08 at 11:48:08

http://www.meancycles.com/Home.asp?PartID=211498&AccCategoryID=2423&AccCategoryTypeID=0&BikeModelID=0&ManufacturerID=0&BikeType=Cruiser&CompanyID=0

these are the adjustable adapters, only problem i see is that i may drill into the adjustment screw when i resize the the mounting whole to 7/16ths