SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Highway Pegs ?
/cgi-bin/YaBB.pl?num=1204349808

Message started by Cory on 02/29/08 at 21:36:48

Title: Highway Pegs ?
Post by Cory on 02/29/08 at 21:36:48

I have been searching everywhere i can think of and i can't find any highway pegs for the savage does anyone know where i can find some or has anyone ever made any that has worked out nicely ?

Title: Re: Highway Pegs ?
Post by Reelthing on 02/29/08 at 22:12:41

believe the ones I have are highway hawks made for the savage

Title: Re: Highway Pegs ?
Post by thumperclone on 03/01/08 at 00:29:06

got a pair from jc whitless on my engine guard,,, cost < $30 i think

Title: Re: Highway Pegs ?
Post by azjay on 03/01/08 at 04:58:54

this what we did, the suzuki crash bar and ISO style pegs from V-TWIN
http://w2.bikepics.com/pics/2006/10/14/bikepics-700731-full.jpg

Title: Re: Highway Pegs ?
Post by vroom1776 on 03/01/08 at 05:50:34

anything that bolts to a 1" diam pipe will fit the suzuki or wingerline highway bar

Title: Re: Highway Pegs ?
Post by skrapiron on 03/01/08 at 08:22:04

I did the same thing. I got the factory engine guard and then a set of Kuyrakyn 4" offset clamp on pegs. With the offset, I can extend the reach and really get comfortable.

It's about $300.00 for the pegs and the engine guard.

Title: Re: Highway Pegs ?
Post by vtail on 03/01/08 at 11:57:08

Kuryakyn 7980 longhorn offset. Love them. Three positions,regular pegs,both(heel and toe) or ext pegs.http://w3.bikepics.com/pics/2007/10/31/bikepics-1072982-800.jpg

Title: Re: Highway Pegs ?
Post by Cory on 03/02/08 at 20:24:36

thanks guys i love the looks of the crash bar and pegs very sharp looks like i will have to break out the credit card without the wife knowing

Title: Re: Highway Pegs ?
Post by skrapiron on 03/03/08 at 04:52:02

3E2D6E686C685D0 wrote:

thanks guys i love the looks of the crash bar and pegs very sharp looks like i will have to break out the credit card without the wife knowing

Remember, it is always easier to get forgiveness, than it is permission..... ;D

Title: Re: Highway Pegs ?
Post by steely on 03/03/08 at 08:01:14

Should you not want to go the crash bar route, there is a listing on ebay for a highway bar w/pegs here:

http://item.express.ebay.com/SUZUKI-SAVAGE-LS-650-1986-1999-HI-WAY-HIGHWAY-BAR_W0QQitemZ140198615557QQihZ004QQcmdZExpressItem

Title: Re: Highway Pegs ?
Post by Rogue_Cheddar on 03/03/08 at 12:45:19

393E2F2F26334A0 wrote:

That bar is exactly like the one I have except I have O-ring pegs on it. The previous owner clamped it just like that to the downtube, but it will bend around the pipe if too tight, plus it's a little unstable. I cut out a small block of 2" thick heavy duty nylon/plastic with a 2" door hole for the downtube to mount to. Fits great and much more stable, and also allowed me to extend the bar further out from the downtube. Sorry no pics as yet.

Title: Re: Highway Pegs ?
Post by steely on 03/06/08 at 19:16:02

Speaking of pegs and engine guards, here is a brand new case guard on ebay for a buy-it-now price of $85.00.

http://cgi.ebay.com/ebaymotors/SUZUKI-GENUINE-ENGINE-GUARD-FOR-LS650-SAVAGE-OR-S40_W0QQcmdZViewItemQQcategoryZ35591QQihZ022QQitemZ350033010357QQrdZ1QQsspagenameZWDVW