SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> installing extra tailight(s)? /cgi-bin/YaBB.pl?num=1203541320 Message started by tinga on 02/20/08 at 13:01:59 |
Title: installing extra tailight(s)? Post by tinga on 02/20/08 at 13:01:59 i am considering installing extra tailight or red running lights,any suggestions or pics of your light mods? also,i got a sportster muff and the pics here did not show as also the link pics of the install. |
Title: Re: installing extra tailight(s)? Post by T Mack 1 on 02/20/08 at 13:37:47 I added a aux brake light. ( LED light) see: http://suzukisavage.com/cgi-bin/YaBB.pl?num=1191357979 |
Title: Re: installing extra tailight(s)? Post by Savage_Rob on 02/20/08 at 13:47:42 Turn Signal Conversion Kit (http://www.electricalconnection.com/other-lighting/tsk-star&sport.htm) |
Title: Re: installing extra tailight(s)? Post by Paladin. on 02/20/08 at 18:04:59 http://paladin.savageriders.com/TailLights.jpg (http://paladin.savageriders.com/TailLights.MOV) The above conversion in action (click on pix for the movie.) I was very appreciative of them a few weeks ago when the taillight bulb burnt out -- I wasn't left no lights in the rear. |
Title: Re: installing extra tailight(s)? Post by Paladin. on 02/20/08 at 18:28:55 Our bike uses separate leads and filaments for run, stop, and turn; same as most modern cars. Old school blinked the brake lights for turn signals., as do most trailers. Guess what -- they make a converter (<$20 at most trailer supply stores) to go from new school to old school so you could use a pair of any two-filament lamps for run/brake/turn functions. What you do is limited only by what you can find and your imagination. I could, for example, mount '64 Mustang taillights in/on my saddlebags. Or the big torpedos off a '61 Plymouth in place of the fender rails. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |