SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> carb choke question /cgi-bin/YaBB.pl?num=1203211568 Message started by mdurham on 02/16/08 at 17:26:07 |
Title: carb choke question Post by mdurham on 02/16/08 at 17:26:07 I have a 97 LS650 Savage. I've posted this problem on a previous thread, but have a new idea about the problem. Problem: Bike starts up great (don't need to choke it), when it warms up, the carb loads up and the will eventually flood out. You can smell the gas, when I crank the throttel to keep it running, black comes out of the exauste. Bottom line, it acts like the choke is still open. I took the carb off and cleaned it as outlined in the Clymer service manual. Question: When I have the choked pushed in all the way in, there is sill at least 1/2" of the brass shaft of the choke still exposed. Do you think the choke is not shutting off all the way? Is this how it is on your carbs. I have a Mikuni 24C4...which I'm pretty sure is the stock carb. I just bought the bike this past fall (for my wife) knowing it had this problem, but got a good deal on it figuring I could fix the problem with a simple carb cleanup or rebuild, but so far hasn't worked. Thanks in advance for your opinions. |
Title: Re: carb choke question Post by feelinjunky on 02/17/08 at 17:17:08 wrong forum man, try rubber side down...you'll get more responses and better advice... |
Title: Re: carb choke question Post by mdurham on 02/18/08 at 17:46:42 6D6E6E676265617E6560720B0 wrote:
How stupid!! I knew that :-/ I posted that while I was looking for some stuff, like possibly a carburator. |
Title: Re: carb choke question Post by nef584 on 02/19/08 at 07:15:42 Waaiiit a minute, isn't this Rubber Side Down? :-? ;D |
Title: Re: carb choke question Post by T Mack 1 on 02/19/08 at 08:51:26 0D0605630 wrote:
It's a "moved" topic. Was in marketplace. |
Title: Re: carb choke question Post by thumperclone on 02/19/08 at 11:02:11 my '06 has a stock bs40ss mikuni,there is about 1/2" brass showing w/choke all the way in,has to be to clear the throttle cable brkt..do you use search function ?? where do you get the model # for your carb?? think the ls always had the bs 40... |
Title: Re: carb choke question Post by mdurham on 02/19/08 at 11:48:57 2D312C34293C2B3A3536373C590 wrote:
So much for that solution. I think the carb type is BS40, and the model number is 24C4, I'm pretty sure they're the same thing. Thanks! |
Title: Re: carb choke question Post by T Mack 1 on 02/19/08 at 13:08:10 From one of Greg's posts in the tech section. http://suzukisavage.com/images/uploaded/CarbLeftweb.jpg see: http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1098869040 |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |