|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Anyone have a 2008 S40 Boulvevard? /cgi-bin/YaBB.pl?num=1200500175 Message started by Savage_Greg on 01/16/08 at 08:16:14 |
|
Title: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/16/08 at 08:16:14 http://www.suzukicycles.com/images/ProductImages/colorVariations/500/S40K8_aBlack_000000.jpg http://www.suzukicycles.com/images/ProductImages/colorVariations/500/S40K8_maroon_76121b.jpg http://www.suzukicycles.com/images/ProductImages/colorVariations/500/S40K8_silver_848998.jpg |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by LANCER on 01/16/08 at 08:28:47 OK, I'll take one. You do have my address for delivery ... right ? ? Just let me know when to expect it so I will be sure to be home to accept it. :D |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/16/08 at 09:18:29 5E535C5157400005320 wrote:
Which color would you like? I just don't remember anyone mentioning one yet... :-/ |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Rogue_Cheddar on 01/16/08 at 10:03:20 Oh noooooo! They went and totally changed it! :o Hey! Wait a minute! :-? Nevermind. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by LANCER on 01/16/08 at 11:04:00 447166645C353633030 wrote:
Which color would you like? I just don't remember anyone mentioning one yet... :-/[/quote] Black please :) |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/16/08 at 11:08:56 Is that the color that Beverly likes? ::) |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by jd06s40 on 01/16/08 at 14:14:25 not any different from the 05,06,or 07.Anyone know when they will change it? |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/16/08 at 14:32:24 7F712523662125150 wrote:
JD, in case you hadn't noticed, it took them 19 years to make the first big change. So to answer your question, the next one might come around the year 2021. Of course, some of us don't think it has changed, and the rest don't want it to ever change :P |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by jd06s40 on 01/16/08 at 18:59:36 GOOD POINT |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by SavageWahine on 01/16/08 at 19:32:31 I'll have the red one please! Just put it on the barge!, I'll walk to the harbor if I have to, just to be able to ride her home! ;D |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/16/08 at 21:32:13 2A247076337470400 wrote:
Of course, I hadn't noticed if the colors are new...Suzuki needs to bring back some of those blues, yellows and reds in the earlier models. Seems like after 2000, all the colors are the same. Oh, I'm just whining...but when you go in the dealership you have to walk down the whole row of bikes just to figure out which one is the S40. All the Boulevards look the same when jammed up together (they do that here so that you have to ask to sit on one)... |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/16/08 at 21:34:02 5D4758555A5043555C5D5A51340 wrote:
Oh, but then you'd have to repaint it again...you wouldn't be happy ;D |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by justin_o_guy2 on 01/16/08 at 22:18:47 I guess it's just my eyes, but I kinda thought the seat looks a bit different. Looked again, naaaah, its the same. I thought the rise from driver to pillon was higher. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by PerrydaSavage on 01/17/08 at 00:29:01 I'll take a red one please! :) |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/17/08 at 04:57:23 0A151314090E3F0F3F07151952600 wrote:
Is it my eyes or is the battery box black? |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by verslagen1 on 01/17/08 at 07:12:38 Your eyes and the tricks of photography. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/17/08 at 08:11:31 293A2D2C333E383A316E5F0 wrote:
So then you are saying that no light is being reflected, as it is being absorbed? Oh, it's a black hole then...hmmm. For me, they could paint it black if they wanted. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by T Mack 1 on 01/17/08 at 15:12:08 685D4A4870191A1F2F0 wrote:
So then you are saying that no light is being reflected, as it is being absorbed? Oh, it's a black hole then...hmmm. For me, they could paint it black if they wanted.[/quote] They probably had to edit (Photoshop?) the chrome . It has a tendency to reflect stuff behind the photographer..... |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/18/08 at 04:03:15 750C6C40424A10210 wrote:
So then you are saying that no light is being reflected, as it is being absorbed? Oh, it's a black hole then...hmmm. For me, they could paint it black if they wanted.[/quote] They probably had to edit (Photoshop?) the chrome . It has a tendency to reflect stuff behind the photographer.....[/quote] I know that part...sometimes, I have to drape something dark over my tripod so that it won't be seen. I've discovered my ugly self in bike photos more than I can count ::) |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by feelinjunky on 01/18/08 at 20:03:41 The battery box looks black for the same reason you see a black stripe on the muffler (Did they paint a black stripe on the muffler, or are my eyes deceiving me? NOT!!!). THE ENVIRONMENT BEHIND THE PHOTOGRAPHER WAS BLACK, and the battery box was at a perfect angle. Notice the differences in the top of the battery box from the top and middle photo. In the top photo, tho picture was taken at a slightly lower angle than the middle photo. The top of the battery box in the top photo shows a bit of shine, which gives it away. Is wasn't a black hole or photoshop any of this mumbo jumbo... |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by geo on 01/18/08 at 20:30:01 The red one looks good. Send me one. By the way, I don't like the handle bars of recent years, they're too uncomfortable. My 2002 has the original staghorn bars and they fit me perfectly. If they change anything, please give me a Speedo/Tach in the middle of the handlebars so I don't have to take my eye off the road to check them. They could also get rid of one of the gears, say, get rid of 5th gear. I would like a lower 1st gear so I can go 5mph at idle. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by verslagen1 on 01/18/08 at 21:50:09 Get rid of 5th! Are you crazy man? Most of us are still thumping of the shifter looking for 6th! |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by verslagen1 on 01/18/08 at 21:52:31 437661635B323134040 wrote:
So then you are saying that no light is being reflected, as it is being absorbed? Oh, it's a black hole then...hmmm. For me, they could paint it black if they wanted.[/quote] The photographer is a relative of lucas. ;D |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by geo on 01/18/08 at 21:52:45 All right, Get rid or 4th. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by old lady katie on 01/18/08 at 22:00:50 Okay, I confess. I DO have a 2008 S40 Boulevard. But I bought it BECAUSE it was the same as the design of the last 100 or so years. Is that so hard to understand? :-) |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by old lady katie on 01/18/08 at 22:04:42 Wow, that come off totally not what I wanted it too. Hold the angry replies. I just meant, I really liked this bike. :-) |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by geo on 01/18/08 at 22:24:22 Old lady Katie, This is a good bike. I like my LS650. I've owned it for 5.5 years. We will kid each other on this website, but we help each other much better. Don't be discouraged. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/19/08 at 06:41:03 7A70657874757067110 wrote:
It's that "new bike smell" that you like, right? |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by SavageWahine on 01/20/08 at 20:15:33 Stopped by the Suzuki bike shop yesterday to get some oil and a new filter. Guess what I saw sitting in the showroom?? The 08 Boulevard! The black engine looks cool, especially the bared fins (I had originally planned on doing that with mine). The seat is really firm!!! I was tempted! It seemed lower for some reason, but I guess I'm just used to my 1 1/2 inch risers. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by DanGill on 01/21/08 at 05:50:39 I have an '06. It has the same blacked out engine. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by old lady katie on 01/21/08 at 08:29:34 447166645C353633030 wrote:
It's that "new bike smell" that you like, right? [/quote] Oh, yeah. Nothing like that new bike smell. Plus, I LOVE the "always wear your helmet" sticker on the gas tank. You never see one of those on an older bike. :-) |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Oldfeller on 01/21/08 at 08:44:29 Yeah, we takes them ugly yuppie safety stickers right on off our traditional thumper-type bikes, we does. Yep, cheerfully retro we are .... old and crippled and still riding jest dandy on a scoot that fits in all the right ways. Fits in weight, fits in power (35 ponies is jest about perfect for a get around bike) fits in handling, fits in ease and low cost maintainability. Fits because it is so wonderfully understressed and overdesigned from the factory we can play games making it run so much better. See, it's both a bike and a hobby, all in one. It can be a swelt bobber type hooigan bike for those who want that action and a wee little traditional bagger (like mine) for those who need that style bike. It can be a side car hauler and a custom bike show winner. Now, you folks know the real reason Lancer bought a 883 Sportster don't you? So he can put his son on it and trounce his butt with his Savage when he puts it back together with the hot cam & ported head that he just finished a'building for himself. (hee hee) We luvs our savage little scoots, now don't we? Oldfeller |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/21/08 at 11:03:16 0802170A06070215630 wrote:
It's that "new bike smell" that you like, right? [/quote] Oh, yeah. Nothing like that new bike smell. Plus, I LOVE the "always wear your helmet" sticker on the gas tank. You never see one of those on an older bike. :-) [/quote] Yeah, that's because Suzuki does not practice any discrimination with it's customers. They'll even sell bikes to stupid people :P |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/21/08 at 11:04:01 51747B527C7979150 wrote:
Suzuki started that in 2002. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by SavageWahine on 01/21/08 at 19:25:50 Go figure! |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by old lady katie on 01/21/08 at 19:39:13 And here she is. This is her debut so to speak. Had to roll her out in zero degree weather to take the pic. I hope this works. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by old lady katie on 01/21/08 at 19:46:26 And here's the one you really wanted. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by SavageWahine on 01/21/08 at 19:46:38 Absolutely gorgeous! You even have a highway guard on it! Cool! And the fancy bullet lights! |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by bill67 on 01/21/08 at 19:48:36 Wahine if you really like that you could sand down the fins like that,It wouldn't be to hard to do. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by old lady katie on 01/21/08 at 19:53:01 48524D404F45564049484F44210 wrote:
Thanks, Wahine, for the compliment. It means a lot coming from you. :-) I can't take much credit since I haven't done anything myself, yet unlike a certain Hawaiian lady I've heard about. :-) |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/21/08 at 22:43:22 595257570D0C3B0 wrote:
I did that to mine, but it actually took me a couple hours with a good file (and boy do those fins ring when you file them). The fins on the later models are actually machined or something. A little extra touch. The fins are flat on the edges. On the earlier models, the fins are kinda rough cast....in other words, it won't look as good if you just use sandpaper. I found that out. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by steely on 01/22/08 at 16:51:30 I actually took a dremel tool (with a sanding disk) to the fin edges on my GS850 after powder coating the head to get that same look. Nowhere near as even, but unless you get right up on it, it doesn't look too shabby. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by bill67 on 01/22/08 at 17:50:44 A belt sander would do it real easy and a perfect job. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by SavageWahine on 01/23/08 at 00:27:30 I have one of those, I'd kinda worry that I'd sand of too much! |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by bill67 on 01/23/08 at 05:26:53 Try sandpaper on a block of wood I think that paint will come off pretty easy. If it don't work you can touch it back up. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/23/08 at 07:16:58 39233C313E34273138393E35500 wrote:
But do you actually want to remove the head to do it? I had the head off on mine. It would be different if the fins were flat on the edges. You can try it with the head installed, but it will be hard to make it good and even...IMO |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by steely on 01/23/08 at 10:33:58 251007053D545752620 wrote:
But do you actually want to remove the head to do it? I had the head off on mine. It would be different if the fins were flat on the edges. You can try it with the head installed, but it will be hard to make it good and even...IMO[/quote] Yeah, I had the head off of my GS as well. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by SavageWahine on 01/23/08 at 11:53:13 That's why I thought I might run into trouble, wasn't planning on taking the head off! |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by SavageWahine on 01/23/08 at 11:54:18 7E74617C70717463150 wrote:
I found you the perfect jacket to go with your bike! Only $20, on ebay! Not sure what size you wear though. http://i12.ebayimg.com/01/i/000/d3/1e/4013_1.JPG |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by bill67 on 01/23/08 at 13:13:38 Wahine you don't have to take off the heads to do that . |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/23/08 at 13:23:59 Hey Bill, how about you show us? I'll be interested to see that if you have time. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by bill67 on 01/23/08 at 13:34:33 Don't do it if its to hard,I thought it was pretty simple. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/23/08 at 15:21:48 666D68683233040 wrote:
Bill, next time you go to a dealer take a close look at the fins on a new one and then compare them to yours. The edges have a different finish on them. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by bill67 on 01/23/08 at 16:58:20 I have a s40 Boulevard 06 Its already done I didn't do anything to it |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by SavageWahine on 01/23/08 at 18:03:41 And here I thought you had done it yourself and knew how to do it effectively! :P Right now actually, I'm going to try and clean the black paint and coat it with some high heat engine enamel I found. I think I want it shinier, and easier to clean! The mud really doesn't want to come off the flat black paint, and it rains too much over here. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by bill67 on 01/23/08 at 18:36:53 Being a home builder all my life and working with a belt sander and on metal too it would be very easy.Did you every drive a moto guzzi motorcycle if you haven't then you wouldn't be able to ride it. same difference. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by SavageWahine on 01/23/08 at 19:09:32 I work a lot with the belt sander to, but on wood (which is not nearly as forgiving as metal I think! It's really very strong, and I can barely hold on to it once it goes. So I'm worried about using it on the bike..... chances are that I will accidentally hit something I didn't mean to!! :-[ |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by T Mack 1 on 01/23/08 at 19:20:57 Sanding block would require more elbow grease , but would offer way more control. Note: they do make a engine clear coat....... |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by bill67 on 01/23/08 at 20:21:22 I also took a fingernail buffer from walmart and buffed and shine the fins shiner than it came and polish it with three coats of zaino polish I like the way it looks. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/23/08 at 21:54:51 767D78782223140 wrote:
Okay. My mistake, but that explains why you don't understand. The earlier models don't have those nice clean edges. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/23/08 at 21:59:24 453C5C70727A20110 wrote:
That's what I was wondering. I just repainted and baked my engine cases with ceramic high temp. paint, and had that thought, too. They do have a lot of different colors. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Reelthing on 01/24/08 at 07:36:33 well, since the idea of some ceramic paints and coatings is to hold the heat in I wonder if the paint is enough to effect the cooling of the engine - contemplated going the other way on the '02 as no what I do it runs hotter by as much as 10c than the '95 |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by T Mack 1 on 01/24/08 at 08:37:07 0B3C3C352D3130373E590 wrote:
Depends on the ceramic material composition..... There are ceramic's that actually transfer heat. We have a set of Corning fry pans & pots at home that cook nicely. I work for a computer chip company and the high power stuff is assembled on ceramic material for dissipation (also at a much much higher material cost than the polymer material). |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by SavageWahine on 01/24/08 at 11:35:34 0A73133F3D356F5E0 wrote:
I have a can of engine clear enamel. I had indeed planned on using that over the ceramic high heat matted black the I painted the engine with. I'm hoping it will make it easier to clean the engine after a rainy day. That particular clear coat is only up to 500 degrees however. Do you think that's enough? |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/24/08 at 20:57:23 685F5F564E5253545D3A0 wrote:
Boy, I didn't see this one coming...I thought we hashed all this "heat/paint" thing in another one of the Savage Woman's topics :P |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/24/08 at 20:59:56 203A2528272D3E282120272C490 wrote:
I have a can of engine clear enamel. I had indeed planned on using that over the ceramic high heat matted black the I painted the engine with. I'm hoping it will make it easier to clean the engine after a rainy day. That particular clear coat is only up to 500 degrees however. Do you think that's enough?[/quote] I have an idea...why not just paint a small part of one of your cases to make sure you like it...did you paint your front pulley cover? That would be easy to undo if you wanted to...just a thought. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/24/08 at 21:01:46 4A33537F7D752F1E0 wrote:
Depends on the ceramic material composition..... There are ceramic's that actually transfer heat. We have a set of Corning fry pans & pots at home that cook nicely. I work for a computer chip company and the high power stuff is assembled on ceramic material for dissipation (also at a much much higher material cost than the polymer material). [/quote] Exactly. I once worked as a toolmaker in a plant that manufactured ceramic insulators. :D |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by SavageWahine on 01/24/08 at 22:43:17 1025323008616267570 wrote:
I have a can of engine clear enamel. I had indeed planned on using that over the ceramic high heat matted black the I painted the engine with. I'm hoping it will make it easier to clean the engine after a rainy day. That particular clear coat is only up to 500 degrees however. Do you think that's enough?[/quote] I have an idea...why not just paint a small part of one of your cases to make sure you like it...did you paint your front pulley cover? That would be easy to undo if you wanted to...just a thought.[/quote] Yes I did paint the front pulley cover. The funny thing is that it doesn't really get all that hot. Not like the fin area. So the enamel should be fine on that part. I'm going to try it, if it peels off I'll just scrape it away. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/25/08 at 04:29:23 6379666B646E7D6B6263646F0A0 wrote: I have an idea...why not just paint a small part of one of your cases to make sure you like it...did you paint your front pulley cover? That would be easy to undo if you wanted to...just a thought.[/quote] Yes I did paint the front pulley cover. The funny thing is that it doesn't really get all that hot. Not like the fin area. So the enamel should be fine on that part. I'm going to try it, if it peels off I'll just scrape it away.[/quote] I just wonder if it will discolor...good luck. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by SavageWahine on 01/25/08 at 23:42:10 How much can black possible discolor? |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/26/08 at 06:39:05 6F756A67686271676E6F6863060 wrote:
More like, how much can clear possibly discolor? |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by T Mack 1 on 01/26/08 at 07:22:33 241106043C555653630 wrote:
More like, how much can clear possibly discolor?[/quote] I pretty sure the black can turn gray as the chemicals breakdown.... the clear can go yellow'ish ..... especially if you spill gas on it while it's warm (experience from my son's Honda SL 70... :-[ ) |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/26/08 at 08:05:06 730A6A46444C16270 wrote:
More like, how much can clear possibly discolor?[/quote] I pretty sure the black can turn gray as the chemicals breakdown.... the clear can go yellow'ish ..... especially if you spill gas on it while it's warm (experience from my son's Honda SL 70... :-[ )[/quote] That's what I wondered. If that is sprayed all over the engine and needs to be removed, it would be quite a job. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by SavageWahine on 01/26/08 at 12:50:43 Too late now! I did coat it in the clear enamel, and boy does it ever look nice! I've let the engine idle twice so far. Once for 5 minutes and once for 10. I'll do it a few more times each a bit longer. It should be cured pretty soon. Hopefully dirt will wash off easily now. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by T Mack 1 on 01/26/08 at 12:59:14 49534C414E44574148494E45200 wrote:
Pict's..... 8-) |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/26/08 at 14:05:47 3B213E333C3625333A3B3C37520 wrote:
So, you took the plunge, in spite of all the skeptics :P Well, I will admit that's how I've done an awful lot of things. Sometimes you win, and sometimes you lose, but you always learn something. So, here's my best wishes. May you be the first Savage Rider to ever have a clear coated engine. We'll await your pics. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by SavageWahine on 01/27/08 at 00:50:06 I'll take a pic tomorrow. Drove her around for an hour today, and other then smelling the clearcoat cure it's doing fine! Still shiny, no bubbling. keep your fingers crossed! |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Soon on 01/30/08 at 21:59:27 I'll have the black one please :) |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 01/30/08 at 22:07:28 Good choice :P |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by BOWDIER on 01/31/08 at 16:10:42 i thiank its still chrome, just looks black in the photo, looks the same as my red 2006, it is a cool bike, why would you spend more. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 02/01/08 at 04:39:25 6C61796A676B7C2E0 wrote:
Exactly. |
|
Title: Re: Anyone have a 2008 S40 Boulvevard? Post by Savage_Greg on 02/08/08 at 10:07:58 53594C515D5C594E380 wrote:
Did you get my PM? |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |