SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Front Turn Signals/Wiring? /cgi-bin/YaBB.pl?num=1199038543 Message started by Dave48 on 12/30/07 at 10:15:43 |
Title: Front Turn Signals/Wiring? Post by Dave48 on 12/30/07 at 10:15:43 Having removed all the chrome-stuff from rear end and fitted mini-turn sigs (probably too far forward to pass annual MoT Test, but they look good!), now got to get front end to match! Mounting brackets off the existing clamps should I think work (and yes I searched and found some helpful pointers right here). I'd prefer to wire them into same bullet connectors as the existing - which I assume reside in the h'lamp shell? If so, can I access by removing rim and dropping (!) lamp unit out of the front? Thanks in advance (and as soon as my finances have recovered from Xmas I SHALL buy a manual, honest). |
Title: Re: Front Turn Signals/Wiring? Post by demin on 12/30/07 at 10:29:24 Yes,the connections are inside h/l bucket.2 screws bottom of the bucket. ;) |
Title: Re: Front Turn Signals/Wiring? Post by Savage_Greg on 12/31/07 at 07:02:50 On The Savage Companion Photo CD there is a photo titled Head_Light_2.jpg in the Electrical folder. ...that answers your question :P |
Title: Re: Front Turn Signals/Wiring? Post by Dave48 on 01/08/08 at 11:38:41 It really hasn't taken me as long as delay suggests - lost internet link for 10 days! Now looks I think neater front and back! |
Title: Re: Front Turn Signals/Wiring? Post by Dave48 on 01/08/08 at 11:41:24 Again! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |