SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Sportster pipe inside stock pipe?
/cgi-bin/YaBB.pl?num=1197384367

Message started by joeh100 on 12/11/07 at 06:46:07

Title: Sportster pipe inside stock pipe?
Post by joeh100 on 12/11/07 at 06:46:07

How feasable would this be?

It looks like it would fit to me. I know the back end could be welded but I'm not sure how the front would attatch.

Title: Re: Sportster pipe inside stock pipe?
Post by serowbot on 12/11/07 at 09:18:15

Why?...Why'o'why'...oh dear god, why?....

Anything can be done,...feasible?..Absolutely not!

Just curious?... What do you see as the advantage, over just swapping to a sporty muff?

Title: Re: Sportster pipe inside stock pipe?
Post by Max_Morley on 12/11/07 at 10:11:44

Why would you want to make the exhaust pipe any smaller?, or are we confused in that you want to put the stock pipe in a sportster muffler? If it is the later, check the tech section as there is lots of information on how to do that mod there. Max

Title: Re: Sportster pipe inside stock pipe?
Post by joeh100 on 12/11/07 at 14:16:56

I mean gut the stock muffler and basically use it as a heat shield. Install a sportster muffler inside of it. That way you still keep the stock look.

Title: Re: Sportster pipe inside stock pipe?
Post by verslagen1 on 12/11/07 at 14:36:09

Seems like a lot of work to gain weight.

Title: Re: Sportster pipe inside stock pipe?
Post by T-Mack1 on 12/11/07 at 19:35:10

If you are going to carefully disassemble the OEM muffler, please take pictures and details.

I have an aftermarket Dyna muffler, but there are rumors that the State (PA) is thinking about including mufflers in the yearly safety inspection. Factory approved mufflers.......and since Suzuki doen't have a performance line for the Savages/S40's........a gutted OEM may be the way to go.