|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> size of grips?? /cgi-bin/YaBB.pl?num=1190692142 Message started by southerngirl on 09/24/07 at 20:49:02 |
|
Title: size of grips?? Post by southerngirl on 09/24/07 at 20:49:02 I am looking for new grips, but i am not sure what size factory 2007 s40's are, I am not sure how to measure or i would have done so?? Can anyone tell me what size bar they are? |
|
Title: Re: size of grips?? Post by grandpa on 09/24/07 at 22:29:36 Should be 1 inch, same as Harley's |
|
Title: Re: size of grips?? Post by Savage_Rob on 09/25/07 at 05:24:55 grandpa wrote:
Yup. 1". |
|
Title: Re: size of grips?? Post by Baldeagle on 09/26/07 at 14:07:27 Installed a set of Kuryakyn grips and they really look nice. The secret is to test fit and test fit and test fit. You will have to shave some plastic off the throdle for the grip to fit. Left side slides right on. You might want to use a SLOWER acting glue. Good luck...........and RIDE SAFE!!! |
|
Title: Re: size of grips?? Post by Savage_Rob on 09/27/07 at 05:46:55 Baldeagle wrote:
As noted in several other threads, it's necessary to shave/file/sand down the ridges on the throttle sleeve before installing the Kuryakyn ISO grips. I used the fine side of a wood rasp and it took the ridges off easily. |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |