SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> replacing that shift rod?
/cgi-bin/YaBB.pl?num=1189045012

Message started by Robertomoe on 09/05/07 at 19:16:52

Title: replacing that shift rod?
Post by Robertomoe on 09/05/07 at 19:16:52

I tried unsuccessfully today to remove my broken shift rod. Am I correct in my asessment that the nut that the rod screws into does not actually move? It appears that the nut is part of the assembly which the rod threads into.

Whats the solution to getting the old rod out?

Title: Re: replacing that shift rod?
Post by Balderdash on 09/05/07 at 19:27:45

Half of the rod is counter screwed, the other half is normal screwed. You must loosen the nut away from the connection so that you can unscrew the rod.

The new rod must be screwed into both holes at the same time, that's why one is counter screwed.

Title: Re: replacing that shift rod?
Post by Robertomoe on 09/05/07 at 22:21:36

I just wasnt using enough elbow grease

i figured it out now, just have to go get the part now