SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> handle bars /cgi-bin/YaBB.pl?num=1188820913 Message started by franch on 09/03/07 at 05:01:53 |
Title: handle bars Post by franch on 09/03/07 at 05:01:53 I think I may have crushed the splines on the buckhorn type bars. after several tightenings the bars keep drifting down.could one revive the splines on the bars with a file ? |
Title: Re: handle bars Post by demin on 09/03/07 at 05:33:38 I doubt if it's the handlebars.It's probably in your riser clamps.Bars steel,clamps aluminum.What I have one is take a hammer,and chisel and made some nicks in the bars(sorta made new splines)not huge just enough to make high spots for the risers to grab. ;DHarleys with apes are real good for moving around,and if you tighten them too much you strip the threads in the risers. >:( |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |