SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Anyone Think this could be rigged to fit?
/cgi-bin/YaBB.pl?num=1188409402

Message started by eglidegirl on 08/29/07 at 10:43:22

Title: Anyone Think this could be rigged to fit?
Post by eglidegirl on 08/29/07 at 10:43:22

Mounted to the License Plate Bracket? What'dya think?

HD Bullet Rear Turn Signal Bar Kit (http://cgi.ebay.com/ebaymotors/Harley-Davidson-Bullet-Rear-Turn-Signal-Bar-Kit_W0QQitemZ170144365678QQihZ007QQcategoryZ35575QQssPageNameZWDVWQQrdZ1QQcmdZViewItem#ebayphotohosting)

Title: Re: Anyone Think this could be rigged to fit?
Post by islandwahine on 08/29/07 at 11:07:28

Looks cool! How wide is the space between the lights?
I looked for measurements but didn't see any. Plus the angle of our fender makes it point up a bit if you put it near the brake light. Maybe there would be a way to lower the license plate holder a bit and sneak the signals above it. I'd have to think about that one.

Title: Re: Anyone Think this could be rigged to fit?
Post by eglidegirl on 08/29/07 at 11:34:24

Now that I look at it, the center area of the bracket may be too narrow from left to right. I'm still lookin at options for relocating the rear signals. Will keep pokin around...

Title: Re: Anyone Think this could be rigged to fit?
Post by DanGill on 08/29/07 at 11:43:48

You might be able to mount that behind the top of the license plate bracket.

Title: Re: Anyone Think this could be rigged to fit?
Post by Bigzuk on 08/30/07 at 13:13:52

Hi, I put a light bar on kind of like this. Do a search for "more tail" posted by bigzuk and you can see the photos and info. Sorry I don't recall how to add them here.

Title: Re: Anyone Think this could be rigged to fit?
Post by Bigzuk on 08/30/07 at 13:19:04

When you search for "more tail" you will need to set it for "match as phrase" posted by bigzuk

Title: Re: Anyone Think this could be rigged to fit?
Post by eglidegirl on 09/01/07 at 06:19:41

HEY...Thanks! Bigzuk, do you remember where you found the bracket? This is the exact set up I'm looking for!

Title: Re: Anyone Think this could be rigged to fit?
Post by Bigzuk on 09/06/07 at 16:19:32

I found the bracket on Ebay. It's a standard part that will fit on any tag mount. I just had to replace one of the lights and found them on Ebay last week also.
I now have three running & three brake lights. One other plus is I now have room for my larger bags.

Title: Re: Anyone Think this could be rigged to fit?
Post by ALfromN.H. on 09/06/07 at 18:06:40

i hope you are gonna post some pics when you get it all done

Title: Re: Anyone Think this could be rigged to fit?
Post by Bigzuk on 09/06/07 at 19:51:51

OK, This is my 3rd try at getting the pic's on here, I hope this works.
http://w2.bikepics.com/pics/2007/06/19/bikepics-937198-200.jpg
http://w2.bikepics.com/pics/2007/06/19/bikepics-937196-200.jpg
http://w2.bikepics.com/pics/2007/06/19/bikepics-937121-200.jpg
http://w2.bikepics.com/pics/2007/06/19/bikepics-937116-200.jpg