SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> BC800 installed...got a ?
/cgi-bin/YaBB.pl?num=1188053232

Message started by praetorian on 08/25/07 at 07:47:12

Title: BC800 installed...got a ?
Post by praetorian on 08/25/07 at 07:47:12

I installed the BC800 a couple days ago. I used 3 of the Radio Shack rare earth magnets. They come 2 to a pack and were inexpensive. I used some 2 part epoxy between each magnet and to hold them to the rim. It is working great, but I DO have one question.

My question is this. Is there a way to reset the trip meter WITHOUT resetting the other info stored. The trip time, Top speed, and trip meter all reset when I reset the trip meter. I would like for the top speed selection to NOT reset if that is possible. I'm afraid that there is NO way for this to happen, though.

Anyone with this setup able to shed any light?

Thanks.

Title: Re: BC800 installed...got a ?
Post by vtail on 08/25/07 at 12:31:53

I have a BC906. If you push reset while on trip-distance it starts blinking and resets the trip-distance back to zero, hold reset longer and it resets all functions. Maybe yours works the same? :)

Title: Re: BC800 installed...got a ?
Post by Oldfeller2 on 08/25/07 at 12:36:33

You got to reset everything except total mileage to reset any of them.

Total mileage can be reset to zero by pulling the battery or by entering the programming screens and editing the total mileage number.

Remember, this thing was meant for a bicycle .... it is amazing to me that it is as totally accurate and rugged and user friendly as it is considering it costs a whopping $15 (mine was the low end version as sold by LL Bean.

Oldfeller