SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Keihin question for Lancer or Clive /cgi-bin/YaBB.pl?num=1187560879 Message started by Dr_Jim on 08/19/07 at 15:01:19

Title: Keihin question for Lancer or Clive Post by Dr_Jim on 08/19/07 at 15:01:19 -

Title: Re: Keihin question for Lancer or Clive Post by LANCER on 08/19/07 at 15:29:17 I drill and tap for a vacuum port on the carbs I sell in the kits all the time.   I use a Sudco part # 007-690 "priming nozzle" for the vacuum port.  It is small, has threads, lists for $2.12 and if you need the info I will check on the drill and tap I use for it.

Title: Re: Keihin question for Lancer or Clive Post by klx650sm2002 on 08/20/07 at 06:46:57 With KLX the fuel tap is ON/OFF/RES so I can't help you there. I do agree with the choice of a 39mm for the Savage though. http://i119.photobucket.com/albums/o147/klx650sm2002/FCRsideview.jpg Clive W  :D

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.