SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> clutch hub nut /cgi-bin/YaBB.pl?num=1187361646 Message started by rigidchop on 08/17/07 at 07:40:46 |
Title: clutch hub nut Post by rigidchop on 08/17/07 at 07:40:46 what is the size of the clutch hub nut, don't want to buy tools i don't need. it's the only thing holding me back from my cam chain replacement. |
Title: Re: clutch hub nut Post by T-Mack1 on 08/17/07 at 07:59:43 Either 32mm or 36mm. I can't remember which is clutch and which is crankshaft nut. Use a ruler to check. A 1 1/4" socket can be used in place of the 32mm as the mm to inch conversion has the 1 1/4" tiny bit smaller. |
Title: Re: clutch hub nut Post by verslagen1 on 08/17/07 at 08:28:28 30 or 32mm on a '96. one size is the crank, and the other the clutch. I priced the 2 sizes at sears, then went to harbor freight and bought a whole set for about the same. |
Title: Re: clutch hub nut Post by T-Mack1 on 08/17/07 at 09:06:47 OOPs, I do own a 30mm socket, forgot. Got it from my VW days. Had all the sockets laid out on the bench durning the rebuild. Used what fit. Sorry. |
Title: Re: clutch hub nut Post by rigidchop on 08/17/07 at 13:42:50 for future reference on an 87, it's 30 mm for the crank and 32 mm for the clutch. thanks for your help. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |