SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> drive pulley /cgi-bin/YaBB.pl?num=1185588092 Message started by greyhead51 on 07/27/07 at 19:01:32 |
Title: drive pulley Post by greyhead51 on 07/27/07 at 19:01:32 has anyone ever had trouble removing their front pulley? was trying to check for a noise that i thought might have been a drive pulley gone south (had that problem before) but even after removing the rear wheel, to get slack in the belt, i couldn't remove the pulley. noise went away after realigning the belt and using the 90 degrees twist test to tighten it. but would still like to know why i couldn't get the front pulley off. (will have to someday) thanks and God bless...greyhead |
Title: Re: drive pulley Post by Kropatchek on 07/28/07 at 08:41:37 An impact driver will loosen the nut. Did on my bike anyway. ;D |
Title: Re: drive pulley Post by justin_o_guy on 07/28/07 at 11:29:15 At what stage of the disassembly did yoiu run into the "I cant do this" realization? |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |