SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Stock Side Rails? /cgi-bin/YaBB.pl?num=1184012433 Message started by Jonny_Chicago on 07/09/07 at 13:20:33 |
Title: Stock Side Rails? Post by Jonny_Chicago on 07/09/07 at 13:20:33 will s-40 stock side rails fit a 96 savage? any input is appreciated Thank you Jonny |
Title: Re: Stock Side Rails? Post by vroom1776 on 07/09/07 at 14:20:13 see tech sect! |
Title: Re: Stock Side Rails? Post by russellwhitlock on 07/09/07 at 17:01:20 Yes, but you will also need to get the bolts that hold them in place, and the locating pin. The newer rails have three bolts and a locating pin + rubber grommet, whilst the older rails have 4 bolts per side. as the newer rails are wider, the bolts are longer. It is a straight forward swap thou, and the rear indicators will fit either rails. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |