SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> relocating rear signals /cgi-bin/YaBB.pl?num=1183577243 Message started by ALfromN.H. on 07/04/07 at 12:27:23 |
Title: relocating rear signals Post by ALfromN.H. on 07/04/07 at 12:27:23 I just got done relocating the real turn signals. I'll put some pics on here but I was wondering if anyone knew what I could use to fill the holes in the pillion handle (side rail) where the signals were located. http://w2.bikepics.com/pics/2007/07/04/bikepics-952104-800.jpg http://w2.bikepics.com/pics/2007/07/04/bikepics-952107-800.jpg http://w2.bikepics.com/pics/2007/07/04/bikepics-952109-800.jpg |
Title: Re: relocating rear signals Post by Max_Morley on 07/04/07 at 12:38:07 Nice job on a nice ride. 2 optiosn I can think of, hardware stores will have chrome snap in plugs in the hardware section and ACE hardware stores have a selection of chrome fasterners under lock and key. May be able to find a chrome carriage bolt that you can bolt in there. Max |
Title: Re: relocating rear signals Post by smokey02 on 07/04/07 at 22:52:34 Maybe small red LED side marker lamps to fill the holes. http://www.customdynamics.com/Images/buttonhead300RGB.jpg or LED Button Head Bolts |
Title: Re: relocating rear signals Post by praetorian on 07/05/07 at 05:57:14 smokey02 wrote:
+1 I am all for auxiliary lighting. Anything to make us more visible to the cagers behind us. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |