SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> handlebar diameter
/cgi-bin/YaBB.pl?num=1181694541

Message started by dwhas3 on 06/12/07 at 17:29:01

Title: handlebar diameter
Post by dwhas3 on 06/12/07 at 17:29:01

hi all, i have a 05 s40. want to get the iso grips for it. does any one know the diameter for the handlebars?
or maybe a part # or link where to buy?
thanks, "dw"

Title: Re: handlebar diameter
Post by babbalou on 06/12/07 at 17:33:44

One inch diameter. My ISO grips fit great. Lots of different places to look, depending on what type of bars. I used Sportster bars I got from JP Cycles. Paid around $42 but others have found them cheaper.

Title: Re: handlebar diameter
Post by Savage_Rob on 06/13/07 at 06:11:53

Kuryakyn Universal ISO Grips (6240) (http://www.kuryakyn.com/products.asp?bn=metric&ci=2925)
http://www.kuryakyn.com/graphics/products/popup/6240-metric.jpg (http://www.kuryakyn.com/products.asp?bn=metric&ci=2925)
Shop around. I got mine for a much better price on eBay a couple of years ago. The 6240 is the correct model for the Savage. Do some searches on Kuryakyn ISO grips and you'll find folks hints on removal of the old and installation of the new.

Title: Re: handlebar diameter
Post by dwhas3 on 06/13/07 at 06:29:23

thanks for the quick replys! do you have to remove the bar end weights?
"dw"

Title: Re: handlebar diameter
Post by Savage_Rob on 06/13/07 at 11:30:14

dwhas3 wrote:

thanks for the quick replys! do you have to remove the bar end weights?
"dw"

Yup, they just pry off. They're just caps though. The weights are inside the bars. Again, do a few searches and you'll get pretty complete info on all that's entailed... taking off the end caps, removing the rubber grips, filing/sanding the ridges on the throttle sleeve, etc.

Title: Re: handlebar diameter
Post by YonuhAdisi on 06/13/07 at 18:16:57

Has anyone here just made a set of handlebars with some 1 inch diameter round stock? I'm thinking that's what I'm gonna do.