SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> 99 sissy bar to a 05 /cgi-bin/YaBB.pl?num=1180567994 Message started by Biker_13 on 05/30/07 at 16:33:14 |
Title: 99 sissy bar to a 05 Post by Biker_13 on 05/30/07 at 16:33:14 will the sissybar from a 99 savage fit a 05 S40 with out any mods |
Title: Re: 99 sissy bar to a 05 Post by riptide_fl on 05/30/07 at 18:47:14 As long as you have the 99 side rails also..got one on mine |
Title: Re: 99 sissy bar to a 05 Post by russellwhitlock on 05/30/07 at 20:04:12 You also need to swap the bolts over. The 99 is held on by four bolts on each side, whilst the 05 the three bolts and a pin/grommet locating arrangement. This is no problem to swap over, but because the 05 bars are about 5mm wider, the bolts are longer. I have just finished doing a swap the other way around. I fitted the 05 bars to my 98, as I didn't want a sissy bar on mine. Takes about 1 & 1/2 hours to do, including swapping the helmet locks and indicators over, as they're slightly different too. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |