SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Replacing turn signals /cgi-bin/YaBB.pl?num=1179934607 Message started by Hiker on 05/23/07 at 08:36:47

Title: Replacing turn signals Post by Hiker on 05/23/07 at 08:36:47 I have been looking at replacement turn signals and it looks to me that some have two wires and some have one wire. Which do I need? I found these http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=008&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=180001328608&rd=1,1. They look like the one wire type. Thanks for any advice. Hiker

Title: Re: Replacing turn signals Post by verslagen1 on 05/23/07 at 09:05:37 Turn signals will have 2 or 3 conductors (wire or metal bit) depending whether they are front or rear.  Some use ground as a conductor.  Our lights don't use ground as a conductor but it can be done. Fronts should have running and turn lights. Rears should have turn lights.

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.